# ADI LTM4650A Compatible Replacement — HGCHIPS HG4650A Dual 25A / Single 50A DC/DC µModule with 1% DC Accuracy

> HGCHIPS HG4650A is the pin-to-pin compatible replacement for Analog Devices LTM4650A — the workhorse dual 25A or single 50A DC/DC µModule regulator with ±1% maximum total DC output error over line, load and temperature. It takes 4.5V–16V in and delivers 0.6V–5.5V out with current-mode control and fast transient response, multiphase parallel current sharing up to 300A, a differential remote sense amplifier, internal temperature monitor, and Burst Mode / pulse-skipping selectable operation — in a 16mm × 16mm × 4.41mm LGA or 16mm × 16mm × 5.01mm BGA. It is also footprint-compatible with the LTM4620A (dual 13A) and LTM4630A (dual 18A), so one layout covers three current classes. ADI lists LTM4650A as "Recommended for New Designs" from US$69.99/pc at 1Ku; domestic replacement-selection analyses (CSDN, 2026-10-30) report factory lead times beyond 20 weeks across this ADI µModule class while datacenter and AI-rail demand absorbs capacity. The HG4650A ships in the identical land pattern, is bench-verified against the ADI reference profile, and is available for board validation. Samples ship immediately.

## Specifications

| Parameter | Value |
| --- | --- |
| Reference part number | Analog Devices LTM4650A (Dual 25A or Single 50A DC/DC µModule Regulator with 1% DC Accuracy) |
| HGCHIPS series | HG4650A — µModule-compatible series (full P/N via FAE) |
| Topology | Dual-output step-down µModule regulator, current-mode control |
| Input voltage | 4.5 V to 16 V |
| Output voltage | 0.6 V to 5.5 V |
| Output current | Dual 25 A or single 50 A; multiphase parallel current sharing up to 300 A |
| DC accuracy | ±1% maximum total DC output error over line, load and temperature |
| Features | Differential remote sense amplifier; internal temperature monitor; higher light-load efficiency and wider VOUT range than LTM4650-1; selectable Burst Mode / pulse-skipping; soft-start / voltage tracking; output overvoltage protection; overcurrent foldback |
| Compatibility | Pin compatible with LTM4620A (dual 13A / single 26A) and LTM4630A (dual 18A / single 36A) |
| Package | 16 mm × 16 mm × 4.41 mm LGA / 16 mm × 16 mm × 5.01 mm BGA |
| Reference status | Recommended for New Designs, from US$69.99/pc at 1Ku (analog.com, checked 2026-11-20); class lead times reported 20 weeks+ (CSDN selection guide, 2026-10-30) |

Electrical parameters referenced from the Analog Devices official product page LTM4650A (analog.com/en/products/ltm4650a.html, checked 2026-11-20); HGCHIPS replacement parameters verified to match the reference profile. Market signals retrieved 2026-11-20; dates shown per row.

## Why HGCHIPS

- Top-tier engineering — design team from China's leading chip design companies and research institutes
- First-tier supply chain — domestic first-rank wafer fab, world top-3 substrate supplier, top-3 domestic packaging &amp; test
- Pin-to-pin footprint — same 16mm × 16mm LGA/BGA land pattern and pinout; drops onto the existing LTM4650A layout with no board change
- Bench-verified — output noise, transient and efficiency verified against the ADI reference profile on the evaluation board; comparison report available under NDA
- HG46xx naming — HGCHIPS µModule-compatible series follows the original family number; full P/N via FAE
- 24-hour quotes — BOM line in, firm price and lead time back the same business day

## Market signals

| Signal | Detail | Source |
| --- | --- | --- |
| Official pricing and status | Analog Devices lists LTM4650A from US$69.99/pc at 1Ku with production status "Recommended for New Designs" — an actively marketed, current part, which makes a qualified second source at design-in directly valuable for board houses that cannot absorb 20-week factory lead times. | analog.com/en/products/ltm4650a.html, checked 2026-11-20 |
| Class lead-time pressure | A domestic µModule replacement-selection analysis (CSDN, GGHK_LIMITED) reports ADI high-current µModule factory lead times beyond 20 weeks (2026-10-30) — the dual-25A class that LTM4650A defines is exactly where datacenter / AI-rail builds are stretching DC-DC module supply. | CSDN GG... replacement selection guide (blog.csdn.net), 2026-10-30 |
| Layout reuse across three current classes | Pin compatibility with LTM4620A (dual 13A) and LTM4630A (dual 18A) means one 16mm × 16mm footprint serves three current classes; a single qualified HG4650A second source de-risks the whole footprint family on one validation. | analog.com LTM4650A product page compatibility note, checked 2026-11-20 |

## FAQ

**Q: Is HG4650A a drop-in replacement for LTM4650A?**

Yes — same 16mm × 16mm LGA/BGA land pattern and pinout; it drops onto an existing LTM4650A layout with no board change. The ±1% DC accuracy and remote-sense behavior follow the ADI reference profile. We recommend a sample evaluation on your board before production release; samples ship immediately.

**Q: Can HG4650A be paralleled beyond 50A?**

Yes — following the LTM4650A scheme, multiphase parallel current sharing scales to 300A; the differential remote sense amplifier and current-mode control loop align with the ADI reference for multi-module arrays.

**Q: Does HG4650A also fit LTM4620A / LTM4630A layouts?**

Yes — the original is pin compatible with LTM4620A (dual 13A/single 26A) and LTM4630A (dual 18A/single 36A); the HG4650A follows the same footprint, so one qualified second source covers all three current classes on the shared layout.

## Contact

Quote: info@hgtech.cc (subject: LTM4650A replacement) · +86 760 8992 4799 · WhatsApp +852 9298 5589
Room 301-319, 3/F, Longde Building, Wuguishan Street, Zhongshan 528400, Guangdong, China
Page: https://hgchips.net/parts/ltm4650a.html · Last updated: 2026-11-20
